Hot Dipped Galvanized 

Hot-dipped galvanized steel is a form of galvanizing for building bridges, skyscrapers, and structures in the harshest environments. The process passes through painstaking stages to ensure that the steel receives corrosion protection that could last for over 70 years. The Hot Dipped Galvanized process is also commonly used on galvanized steel coils.

Find out in this article how hot-dipped galvanized is processed and its long-lasting benefits to structures.

What is hot-dipped galvanized?

Hot dipped galvanized is a galvanizing method by coating the steel and iron with zinc. The steel enters a hot bath of molten zinc at around 842 degrees Fahrenheit. During this process, the zinc reacts with oxygen after exposure to the atmosphere. 

It leads to the formation of zinc carbonate, which offers rust and corrosion protection to the steel. Hot-dip galvanization offers a superior life cycle and is cost-efficient due to its anti-corrosion properties. 

The critical feature of HDG products is longevity and durability. The first maintenance time of hot-dipped galvanized steel is proportional to the zinc coating thickness. It passes through different processing state that yields zero maintenance in the years to come.

Hot Dipped Galvanized vs. Galvanized

The difference between galvanized and hot-dipped galvanized steel lies in the texture and finishing.

Galvanized materials have sharp and smooth finishing, while hot-dipped galvanized have a rough texture. Galvanization passes through different stages to form a layer of zinc carbonate on the metal surface to protect it from corrosion. 

Hot-dip galvanization undergoes a process to form a pure layer of zinc on the surface, which passes through three stages: preparation, galvanizing, and inspection. 

For your easy understanding, galvanized materials have a sharp and smooth texture, while hot dip galvanized have a rough surface. Hot dipped galvanized materials are less expensive than galvanized materials if you consider their performance and longevity.

Hot-dip galvanized materials are mistaken for more costly than it is. People perceive hot-dipped galvanizing as expensive because it underwent a high-performance coating process.

If you think about its longevity of fifty to seventy years, hot-dipped galvanized is a more inexpensive form of galvanization.  

Hot Dipped Galvanized Process

Hot-dip galvanizing undergoes meticulous stages to develop a metallurgical bond between the steel and zinc. Before the steel goes to the galvanizing kettle, it passes through a four-step cleaning process. 

The steel passes through the caustic tank at 180 degrees Fahrenheit. Immersing the steel in an acidic solution removes the steel’s paint, dirt, grease, oil, and residues. The steel enters the fresh water tank to rinse the acidic cleaning solution. 

It goes to a pickling tank of hot acidic solution at 140 to 145 degrees Fahrenheit to remove the mill scale and then rinsed off. The steel immerses in a flux zinc solution consisting of zinc ammonium chloride at 140 to 170 degrees Fahrenheit. 

Flux provides oxidation on the clean surface once exposed to the air before the steel undergoes galvanization. The flux dries on the surface to adhere and helps in the liquid zinc wetting process. 

Once the surface is debris-free, the steel enters the galvanizing kettle, containing molten zinc at 830 to 850 degrees Fahrenheit. The steel remains in the kettle until it reaches the steel and molten zinc bath temperatures.

A diffusion-reaction occurs when the steel is in direct contact with the molten zinc. The reaction leads to the formation of a metallurgically bonded zinc alloy layer. In some instances, the molten zinc bath is added with lead to encourage bath fluidity. 

Its primary purpose is to limit excess zinc on the steel by improving the drainage properties, easy dross recycling, preventing floating trash, and protecting the galvanizing kettle from irregular heat distribution from the galvanizing burners. 

Removal of residues from the steel ensures that the metal has a pure zinc coating. Dipping the steel in a chromate quench tank is the final step in the hot-dip galvanization process. 

Its purpose is to reduce the steel temperature, prevent a reaction from air exposure, and retains the brightness of the zinc coating during storage.

A quality control team inspects the HDG steel for consistency and fabrication of its component before sending it to a galvanizing machine.

The quality assurance team will check the product for possible factory defects when the galvanizing process is over. They also measure the thickness of the zinc coating.

How long does hot-dip galvanizing last?

The process of hot-dip galvanization is essential in protecting the steel from rusting and corrosion in the harshest environments. It does not require maximum maintenance to last more than fifty years. 

However, its corrosion resistance depends on the type of surroundings and elements that may impact its longevity. According to a study, bare steel’s decomposition rate is 1/30 in the same environment. 

Five factors contribute to the performance of hot-dip galvanized steel: rainfall, humidity, temperature, air salinity, and sulfur dioxide air concentration. 

Dr. Gregory Zhang of Teck Metals Limited developed the accurate global performance data known as the Zinc Coating Life Predictor. Using the TFM chart, the first maintenance for the zinc coating shows that 95 percent of the zinc coating is intact. 

It recommends initial maintenance of the material to prolong the longevity of the structure or application.

The governing specification for hot-dipped galvanized material, ASTM A123, says steel products with over ¼ inch thickness should have 3.9 mils of zinc coating. Steel more than ¼ inch thick can last for 72 to 73 years to first maintenance, even if it has exposure to the harshest environments. 

Hot-dip galvanizing is a complete immersion process after submerging the steel into the acidic solution, pickling solution, flux, and molten zinc. It ensures the exterior and interior sides have a full zinc coating.

This process ensures that no corrosion could occur even in the steel structures’ hollow, tubular, and fastener threads.

Corrosion and rusting happen in the interior and concave parts, painted but without corrosion protection. The interior of hot-dipped galvanized material receives ample protection as condensation and humidity have higher rates. 

Is hot-dip galvanized rustproof?

Yes, hot-dip galvanized steel is rustproof depending on its exposure to specific environments. Its rust and corrosion resistance depends on the thickness of the zinc coating and the harshness of the environmental conditions.

Generally, bare steel products in the same environment have a corrosion rate of 1/30. 

Conclusion 

Have you realized the importance of zinc coating thickness in hot-dipped galvanizing? The protection performance of hot-dipped galvanized materials depends on the thickness of the zinc coating and the corrosion of the harshest environments. Comparing galvanized and HDG materials, HDG is inexpensive in the long run, as the material can last for over seven decades.   

 

Rate this post
Facebook
Twitter
LinkedIn
Pinterest
Latest Posts

Related Posts

Galvannealed Steel

Galvannealed steel’s zinc coating has a good absorption quality that enables paints to cling to the surface compared to galvanized steel. Read to learn more

Read More

What is Galfan?

Galfan is one of the least-known substrates in steel coating due to its late entry into the industry. Find out why Galfan-coated steel products last

Read More